Advertisement
WARNING
WiFi / Remote Control Pairing
Fan only model
Pairing the remote control
1. Turn on the ceiling fan.
continue pressing the
button until you hear a "beep"
sound. ie. It is paired.
If you don't hear a "beep" sound,
repeat step 1 and step 2 again.
Entering WiFi Pairing mode:
1.Turn on the power.
2.Within the first 20 seconds, press and
hold the "
" button until a "beep"
is heard.
3.Continue step connect on your smart devices
to complete the pairing.
If you don't hear a "beep" sound, repeat the above steps.
FAN OFF
: to switch off the fan.
SLEEP MODE
: Turn on the fan at an extra lower speed to
create a general breeze.
SPEED BUTTON: 1 = lowest speed. 6 = highest speed.
NATURAL WIND MODE
children. 1-6 speed changes randomly to feel the breeze.
FORWORD AND REVERSAL
TIMER 1H/4H/8H: preset timer for fan and light to stop
automatically. ie. if timer set at 1H and then press 4H, fan will
stop at 4H. Setting default to last press.
WIFI BUTTON
:Follow the instructions and press and hold for
20 seconds to enter wifi matching mode.
6* Year Warranty
Visit our website for details
WARNING
•
Installation of fans MUST follow SAA standards and meet local authority regulations.
•
Installation MUST
•
Fan and light MUST be earthed.
•
Bracket MUST
•
DO NOT mix blades from one model to another, all blades MUST be replaced if damaged.
•
The warranty is VOID if product is not installed according to this installation guide.
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
: designed for the elderly and
: summer/winter reverse mode.
https://www.martecaustralia.com.au/warranty-statement/
Fan LED Light Model
Pairing the remote control
1. Turn on the ceiling fan.
continue pressing the
button until you hear a "beep"
sound. ie. It is paired.
If you don't hear a "beep" sound,
repeat step 1 and step 2 again.
Entering WiFi Pairing mode:
1.Turn on the power.
2.Within the first 20 seconds, press and
hold the "
" button until a "beep"
is heard.
3.Continue step connect on your smart devices
to complete the pairing.
If you don't hear a "beep" sound, repeat the above steps.
FAN OFF
: to switch off the fan.
SLEEP MODE
: Turn on the fan at an extra lower speed to
create a general breeze.
SPEED BUTTON: 1 = lowest speed. 6 = highest speed.
NATURAL WIND MODE
: designed for the elderly and
children. 1-6 speed changes randomly to feel the breeze.
FORWORD AND REVERSAL
TIMER 1H/4H/8H: preset timer for fan and light to stop
automatically. ie. if timer set at 1H and then press 4H, fan will
stop at 4H. Setting default to last press.
LIGHT ON/OFF
: to switch off the light.
: warm white (2700K) / netural white (4000K) /
CCT
cool white (6500K)
LED-
LED+ : minus "-" = reduces brightness
plus "+"= increases brightness
: summer/winter reverse mode.
Advertisement
