Advertisement
WARNING
How to Install Blades
Fg.3
Attach the blade to the
top of the motor using
the 2 screws provided.
Tighten the screws and
repeat this procedure for
all blades.
NB: Ensure the blades do not get damaged or bent during the installation process while the fan is on the ground. This will
ect the performance and balance of the fan and this is NOT covered under warranty.
How to Install Blades
Fg.4
Fan LED Light Model
Attach the blade to the
top of the motor using
the 2 screws provided.
Tighten the screws and
repeat this procedure for
all blades.
How to Install
Fg.5
Place fan into hanger bracket and align ball joint slot with
hanger bracket as illustrated.
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
Fg.6
After wiring is
completed, attach the
canopy to the hanger
bracket by pushing
upwards and twisting
anti-clockwise. Tighten
screws and ensure
canopy is not touching
the ball joint.
Advertisement
