Advertisement
WARNING
Smart Life matching process, please follow the steps:
1.Download the "Smart Life" APP on your smart devices by
scanning the QR code below with camera.
2.Turn on WiFi and Bluetooth on your smart devices. Ensu-
re it's connected to a 2.4GHZ WiFi.
3.Open the APP, follow the steps to register new user acc-
ount or login existing account.
4.Follow instructions in main manual (steps can also be
found on the back of the remote) to put the fan into WiFi
pairing mode. If the operation is successful, go to step 5.
If the fan has previously been paired or you can't get it to
work, please go to step 4 to RESET the fan.
5.RESET the fan. This step is NOT necessary if the fan has
successfully entered WiFi pairing mode in the last step, if
not, try to RESET the fan: turn on the fan, power off after
10 seconds, power on again after 15 seconds, long press
"Fan Stop" for 5 seconds, if "beep beep" are heard, the
reset is successful. If "beep beep" is not heard, the reset is
failed, please repeat this step.
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
6.Once the fan has entered WiFi pairing mode, open the
APP again on the smart device. Click "Add Device" in the
middle or the "+" on the top right of the screen.
7.The auto scan should begin automatically, and the fan
should show up at the top of screen within a few seconds.
Note: If the fan is not showing up, you can add it manually
by clicking and navigate to: >Add Manually >Small Home
Appliance > Fan
Advertisement
