Page 1
LINK AC SERIES Ceiling Fan Instruction Book Models: FSL124 FSL1244 FSL1243 DESCRIPTION QUANTITY Motor assembly Instruction manual Screw kit Balancing kit Hanging bracket Wall control kit Blades...
Page 2
ONLY install the wall controller kit that comes supplied by Martec Pty Ltd within package. DO NOT control operation of fan and light with any other wall control than what was approved by Martec Pty Ltd and supplied within this package, as this will void warranty.
Page 3
With Light model Hanging bracket ______ ______ Canopy ______ Downrod assembly ______ Yoke cover ______ Top housing Blade Motor assembly ______ With LED tricolour With 2*E27 holders light kit integrated light kit ______ PC shade www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 3...
Page 4
Without Light model Hanging bracket ______ ______ Canopy ______ Downrod assembly ______ Yoke cover ______ Top housing Blade Motor assembly ______ Metal cover ______ www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 4...
Secure the hanger bracket to ceiling beam or a suitable piece of timber inser ed between the ceiling beams. Martec Pty Ltd recommends the bracket to be a ached with two long screws as supplied within the package. There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.1.) Place circular shockproof gasket above the hanger bracket.
Page 7
HOW TO INSTALL/REMOVE THE PC SHADE (Version with lights) Align the shade as shown in the figure below, and place the PC ( Plastic) shade. Spin it clockwise. To remove turn the shade anti-clockwise If the fan is with LED tricolour light If the fan is with E27 light model (FSL1244) model (FSL1243) www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au...
Page 8
HOW TO INSTALL/REMOVE THE METAL COVER (Version without lights) Align the metal cover with the central spindle extended from motor as shown in the figure below, and spin it clockwise. To remove turn the shade anti-clockwise If the fan is without light model (FSL124) Tricolour CCT (Colour changeable temperature) Please make sure the light switch is off before changing the colour temperature.
Page 12
Martec Pty Ltd service network. The Martec Pty Ltd service network is defined at our discretion, yet is limited by the boundary of the city in which you live. Travel outside of the city limits by the Martec Pty Ltd authorised service agent will incur commercial costs to be paid for by the purchaser at a rate calculated by the number of kilometres travelled beyond the city limits.