How To Assemble Containers With Removable Blades; Removable Blades - Waring MBB-521 Manual

5. CAUTION: To avoid damage to your blender, do not run
the blender if the blades become blocked or jammed
during use. Turn the blender "OFF" immediately, remove
the container from the blender base and dislodge the
material that is blocking or jamming the blade.
HOW TO ASSEMBLE CONTAINERS WITH

REMOVABLE BLADES

1. Before starting, make sure that the blender cord is
unplugged and that the switch is in the "OFF" position.
2. Refer to Figure 1. The following points are important
to note when putting together the container assembly:
3. Container gasket must be between the blade assembly
and the container.
4. Container collar must not be misthreaded onto the
container.
5. Container collar must be securely tightened onto the
container before placing food or liquid in the container.
6. Tighten the container collar by holding the container
upside down and turning the container collar
counterclockwise.
7. Place container assembly on unit base so that it is firmly
seated and not tilted to one side. Never place the
container collar or the blade assembly on the unit base
unless the container has been completely assembled
and securely tightened.
HOW TO DISASSEMBLE & CLEAN
CONTAINERS WITH REMOVABLE BLADES
1. Be sure the switch is in the "OFF" position.
2. Remove the container assembly from the unit base and
empty the contents.
3. To disassemble the Waring Blender container assembly,
5