Page 1
FOOD & BEVERAGE BLENDER SERIES MB & PB SERIES For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Contents Safety Cautions ..............1 Instructions for Use .............. 3 Hot Blending Instructions ............. 3 Reset Switch ................ 4 Cleaning & Maintenance ............4 UK Guarantee ............... 5 UK After Sales Service ............6 UK Wiring Instructions ............7 SAFETY CAUTIONS Always follow these safety cautions when using this appli- ance to avoid personal injury or damage to the appliance.
Page 3
• Only use the appliance indoors on a solid, level work surface. • Do not allow the lead to hang over the edge of the work surface. • Avoid contact between the lead and hot surfaces. • Always hold the carafe with one hand whilst blending. •...
Instructions for Use Before using this appliance for the first time, the carafe and lid should be cleaned (refer to Cleaning & Maintenance). • Ensure the appliance is switched off and unplugged. • Place the carafe on the base of the appliance. Never use a container other than a Waring carafe with your Waring blender.
cover. (This will allow venting of the rapidly heated and expanding air present inside the carafe.) • Keep hands and other exposed skin away from the open centre of the cover to prevent possible injury when the blender is in operation. •...
• Place the carafe on the base of the appliance and run on the HI speed setting for two minutes. • Empty the carafe and repeat as above. • Rinse the carafe and dry thoroughly before storing. Cleaning the Base •...
UK After Sales Service For further advice on using this Waring appliance, and other products in the Waring range, please contact the Waring Customer Care Line on 08700 604260 (09:00 to 17:00 Monday to Friday) or, alternatively, e-mail your enquiry to support@waringproducts.co.uk.
UK Wiring Instructions This Waring appliance is supplied with a BS 13 amp moulded (fused) mains plug on the supply lead. Should it be necessary at any stage to remove this moulded plug and replace it with a re-wireable BS 13 amp mains plug, the re-wiring should be completed as follows: Class I (1) The wires in the mains lead are coloured in accordance with...
Page 9
PART # 028631 Rev 01 0701 Printed in USA MB/PB Series IB 07WI31005...
Need help?
Do you have a question about the MB SERIES and is the answer not in the manual?
Questions and answers