Grounding Instructions - Waring MBB-521 Manual

14.When blending hot liquids, remove center piece of two
piece cover. Limit amount of material processed to one
cup (8 oz.). Always begin processing at the lowest
speed setting. Keep hands and other exposed skin away
from the lid opening to prevent possible burns. See Hot
Blending instructions.
15.Screw on container bottom firmly. Injury can result if
moving blades accidentally become exposed.
16.Do not leave blender unattended while it is running.
SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS

For your protection, Waring Blenders are equipped
with a 3-conductor cordset that has a molded 3-prong
grounding-type plug, and should be used in combination
with a properly connected grounding-type outlet as shown
in Figure A. If a grounding-type outlet is not available, an
adapter, shown in Figure B, may be obtained so that a
2-slot wall outlet can be used with a 3-prong plug. Referring
to Figure C, the adapter must be grounded by attaching its
grounding lug under the screw of the outlet cover plate.
CAUTION: Before using an adapter, it must be determined
that the outlet cover plate screw is properly grounded. If in
doubt, consult a licensed electrician. Never use an adapter
unless you are sure it is properly grounded.
Note: Use of an adapter is not permitted in Canada.
3