Return it to the nearest authorized service facility for examination, repair, or adjustment. 6. The use of attachments, including canning jars, not recommended or sold by Waring may cause fire, electric shock, or injury. Blender or any other ®...
Page 3
7. Do not let cord hang over edge of table or counter, or touch hot surfaces. 8. Keep hands and utensils out of jar while blending, to prevent the possibility of severe personal injury and/or damage to the blender. A rubber spatula may be used, but must be used only when the blender is not running.
NOTE: Never use containers other than Waring Pro Blender containers with your unit. 4. For other blending tasks, put ingredients into container, then put the lid on firmly.
HOW TO ASSEMBLE CONTAINERS WITH REMOVABLE BLADES Always wash and rinse container prior to initial use. . Before starting, make sure that the blender cord is unplugged and that the switch is in the Off position. 2. Refer to Figure on page 5. The following points are important to note when putting together the container assembly: •...
Page 6
. Be sure the switch is in the Off position. 2. Remove the container assembly from the unit base and empty the contents. 3. To disassemble the Waring Tailgater ® container collar clockwise. 4. The collar, blade assembly and gasket are dishwasher safe.
HOW TO CLEAN UNIT BASE . To clean the unit base, unplug the power cord. Wipe the exterior surfaces with a soft cloth or sponge dampened with cleaning solution. Rinse with clean water. Do not immerse the base in cleaning solution or water. Wipe the base with dry towel.
Need help?
Do you have a question about the TAILGATER TG15 and is the answer not in the manual?
Questions and answers