Safety; General Safety Guidelines; Co 2 Safety - Cold Jet i3 MICROCLEAN 2 Operator's Manual

Safety

General Safety Guidelines

This machine is designed to comply with international design standards and the European
•
Machinery Directives.
Using the machine does not pose a risk to the operator when the instructions in this manual are
•
followed. However, certain precautions must be taken during its use. To understand all the
necessary precautions, the machine operator must read the entire manual before operating or
performing maintenance on the machine.
Operation should only be performed by trained personnel. Below are some basic safety
•
guidelines:
o Follow local governing codes to ensure a minimum standard of safety.
o Wear protective gloves, eye protection, hearing protection, and protective clothing.
o Operate the machine in a well-ventilated work area.
o Follow the prescribed inspection schedule.
o Start up and shut down the machine according to the instructions in this manual.
o Do not operate a machine that is damaged or in disrepair.
o Do not store objects on top of machine.
CO Safety
2
WARNING
prevent the build-up of carbon dioxide gas. If used indoors or in other
confined spaces, a CO
levels of CO
OSHA is a 0.5% average over an 8-hour workday.
This machine uses dry ice (CO
•
Avoid coming into direct contact with dry ice as it may cause severe tissue damage. Study the
•
material safety data sheet (MSDS) of dry ice (CO
all the recommendations and guidelines listed therein.
Operate the blaster in a well-ventilated work area with continuous CO
•
The effects of CO
•
Click to go to Top of Document
- Ensure adequate ventilation when operating this equipment to
detector should be used to monitor excessive, unsafe
2
gas and provide a suitable warning. The legal exposure limit by
2
in solid form). The temperature of dry ice is -109°F (-78.9°C).
2
are entirely independent of the effects of oxygen deficiency.
2
) supplied with the delivery of dry ice and follow
2
6
-level monitoring.
2
2023-08-29