Cold Jet i3 MICROCLEAN 2 Operator's Manual page 9

WARNING Ensure that expended dry ice pellet/particle emissions are not in the vicinity of air ducts
that could allow CO
WARNING Due to the nature of dry ice and atmospheric conditions, use caution when operating,
storing, and cleaning the machine as condensate can build up and leave moisture on
the ground near the machine and blast hose. It is recommended to wear appropriate
non-slip work shoes and it is necessary to wipe up and dry any condensate from the
work area that could cause a slip hazard.
WARNING This machine has been designed for use with dry ice blocks and 3mm dry ice pellets
recommended by Cold Jet. The use of other cleaning agents or chemicals may adversely
affect the safety of the machine.
WARNING High pressure blast streams can be dangerous if subject to misuse. The blast stream
must never be directed at persons, live electrical equipment, or the machine itself.
WARNING Do not use the machine within range of persons unless they wear the required
personal protective equipment (PPE).
WARNING This machine should not be operated by or left unattended around children or
untrained personnel.
WARNING High pressure hoses, fittings, and couplings are important for the safety of the machine.
Use only hoses, fittings, and couplings supplied by Cold Jet.
WARNING To ensure machine safety, use only original and replacement parts from Cold Jet.
WARNING The applicator and blast hose contain electrical connections. Do not immerse in water.
WARNING Only use Cold Jet applicators, nozzles, and hoses.
Do not use the machine if an electrical supply cord or important parts of the machine
WARNING
are damaged or missing, e.g., safety devices, side panels, guards, high pressure hoses,
applicator, hardware, nuts, bolts, screws.
WARNING Inadequate extension cords can be dangerous. If an extension cord is used, it must be
suitable for the environment in which it is used. If used outdoors the connection must
Click to go to Top of Document
to enter another space.
2
9 2023-08-29