Safety Regulations; General Measures; Personnel Qualifications; Security And Risk - Cold Jet IceTech R1000H User Manual

Industrivej 62
DK-6740 Bramming
Denmark

SAFETY REGULATIONS

General Measures

The IceTech R1000H manual contains instructions on starting up, operating and servicing the machine. The operator must
follow the instructions in the manual. Moreover it is important that the owner makes sure that the operator understands
the contents of this manual and follows its guidelines and safety regulations.

Personnel Qualifications

Employees, who are in charge of mounting, operation, service and maintenance must be adequately qualified to take care
of such job functions.
If the employees do not possess sufficient knowledge, they must be instructed and trained properly. If necessary, this can
be arranged in cooperation with the manufacturer of the machine.
The owner of the machine shall make sure that the operator, who is to work with the IceTech R1000H, fully understands
the importance of studying the content of the manual and complying with the SAFETY REGULATIONS described on the
following pages as well as those placed on the machine.

Security and Risk

The IceTech R1000H is designed so as to comply with the EC Declaration of Conformity for Machinery. Therefore, using
the machine does not pose a risk to the operator when the instructions in this manual are followed carefully.
It is important that the operator carefully follows the safety signs on the machine and the safety regulations described later
in this manual and that the operator reads and understands the content of this manual before starting up the machine.
Installation must be carried out according to the instruction "Unpacking and preperations before installation".
The machine may only be installed by authorized personnel, that is electricians with knowledge of the Council Directives
73/23/EEC and the 89/336/EEC and the 89/336/EEC (or similar directives in other parts of the world).

Danger of Suffocation

Dry ice slices are CO in solid form. At ordinary atmospheric pressure, CO
2
of -79°C (-110°F) or lower. Therefore, during dry ice production, the CO
from solid form into gas form.
Please note:
SINCE THE SPECIFIC GRAVITY OF CO
WITH ITS CONTENTS OF OXYGEN WILL BE REPLACED BY CO
PLACE IN SMALL OR INSUFFICIENTLY VENTILATED ROOMS.
Original
IceTech R1000H
Operator Manual for Reformer
IS HIGHER THAN THAT OF ORDINARY ATMOSPHERIC AIR, THE AIR
2
Version:
Page:
Date:
Init.:
can only exist in this solid form at temperatures
2
will immediately be heated and thus transform
2
IF THE DRY ICE PRODUCTION IS TAKING
2
1.0
7 from 23
30.08.17
JM