BenQ DesignVue PD Series User Manual page 68

Item
Video Input Presets a video input to go with the USB Upstream
port. See
Switch before use on page
Auto Switch Once enabled, if USB or Thunderbolt™ (PD2720U /
(PD2720U / PD3220U) / USB-C™ (PD3420Q) cable is
PD3220U / disconnected, the USB input source and the control
PD3420Q only) will be switched to the other computer automatically.
KVM Auto Once enabled, if USB or Thunderbolt™ cable is
Switch disconnected, the USB input source and the control
(PD2725U / will be switched to the other computer automatically.
PD3206U /
PD3225U only)
Function
Setting up the second video source for KVM
If None is selected from KVM Switch > Video Input for
Scenario A: Working with two computers and one monitor
on page 47 and USB Upstream is selected for KVM Switch,
the screen does not display anything from the second
source as there is none. You cannot control the current
display (from Thunderbolt™ 3 or USB-C™, depending on
your purchased model) either as the keyboard and mouse
control has been switched away. In this case, select a
video input manually from Input > Signal Input.
46.
68
Range
• DisplayPort
• HDMI1
• HDMI2
• None
• ON
• OFF
• ON
• OFF