BenQ DesignVue PD Series User Manual page 31

5. Connect the Hotkey Puck G2 to the monitor.
Connect the Hotkey Puck G2 to the mini USB port (exclusively for Hotkey Puck G2
connection) on the rear of the monitor. For more information on Hotkey Puck G2, see
Puck G2 and its basic operations on page
6. Connect the power cable to the
monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
7. Install the back cover.
Align the back cover with the holes on the back of
the monitor, and press both sides and the upper
part of the cover against the holes to lock it into
place as illustrated.
Push the lower part of the back cover toward the
monitor to secure it.
8. Organize the cables.
Route the cables via the cable clip.
44.
31
1
1
Hotkey
2