Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents of this document. BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents thereof without obligation to notify any person of such revision or changes.
Table of Contents Table of Contents Disclaimer................2 Copyright................2 Important safety instructions..........4 Safety precautions and maintenance ........... 4 Usage ....................6 Installation notes................9 Package content ..............11 Unpacking ..................11 Packing list..................12 Overview ..................13 Setting up the display ............15 Putting the display front side up..........
• When turning off the display by disconnecting the power cord, wait 6 seconds or more before reconnecting the power cord for normal operation. • Ensure the use of an approved power cord provided by BenQ at all times. If your power cord is missing, please contact your local service center.
Page 5
Important safety instructions Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off.
Important safety instructions Usage • Don’t turn the ventilation hole of power box upside down as shown below. The ventilation hole of power box The ventilation hole of power It is prohibited to turn the It is prohibited to place tilt ventilation hole of Power Box upside down.
Page 7
Important safety instructions • When the display is in use, as shown below, please do not open the cover of “bottom side” I/O ports. Do not open the cover of “bottom side” I/O ports.
Page 8
Important safety instructions Remote controller precautions: • Power function of the remote controller works only when pointing to the front side of the display; the other functions work at either side. Front Side (450 nits) Back Side (700 nits) There is a product lable at the front side.
Important safety instructions Installation notes There are 8 holes used at the side of the display set. (M4x15mm)
Page 10
Important safety instructions Please make sure you have a solid installation as shown. You can install the display set with 8 screws (M4x15mm).
Package content Package content Unpacking • This product is packed in a carton together with its standard accessories. • Due to the size and weight of this display, it is recommended to move it with at least two persons . •...
Setting up the display Setting up the display Putting the display front side up While putting front side up, the screw of the display will be seen on the left side of the I/O cover.
Setting up the display Connecting power box to the display 24V*1 Red line (10 pin) 12V*1 Yellow line (8 pin) Power box Dual side display 24V*1 12V*1 Red line Yellow line (10 pin) (8 pin) Name Connect the 12V (8 pin) power line Connect the 24V (10 pin) power line...
Setting up the display Connecting HDMI cables and connectors Plug two HDMI cables into the cabinet, and ensure that all cable plugs are firmly fitted into the jacks. HDMI HDMI Front side Back side (450 nits) (700 nits)
Setting up the display Putting back the downside cover and I/O covers 1. Putting back the downside cover and tightening with 10 screws (M6x30mm). 2. Putting back other I/O covers not use with tightening screnws.
Setting up the display Using the remote control Name Description Press to turn power on/off. Power MENU Press to enter OSD setting menu. Press to move right in OSD setting menu. Press to move left in OSD setting menu. ...
Setting up the display OSD menu Press “MENU” into the OSD setting menu, and then press “” or “” to select the item, at last press “EXIT” to exit menu. Luminance menu Press MENU to select one of the following, and then press “” or “” to select the desired level.
Setting up the display Color menu Press MENU to select one of the following, and then press “” or “” to select the desired level. Name Description Color Temperature Range: 6500K, 9300K, 11500K, User Define; Default: 9300K. If you choose User Define, gains and offsets of red, green, and blue are adjustable.
Setting up the display OSD setting menu Press MENU to select one of the following, and then press “” or “” to select the desired level. Name Description Horizontal Default: 50 Default: 50 Vertical Default: 0 Transparency Default: 50 OSD Time Out 0(0˚), 1(90˚), 2(270˚), 3(360˚);...
Setting up the display Setup menu Press MENU to select one of the following, and then press “” or “” to select the desired level. Name Description Language English/Español/Français/Deutsch/Italiano/Português/Русский/ 简体中文 / 日本語 / 繁體中文 ; Default :English HDMI1/HDMI2;Default :HDMI2 Input Display Size Full Screen / Smart Fit / 4:3 / Smart4:3 ;...
Troubleshooting Troubleshooting Symptom Possible Cause Remedy No picture is displayed. 1. The power cord is Plug in the power cord. disconnected. Make sure the power switch is 2. The main power switched on. switch on the back of Connect a signal connection to the display is not the display.