BenQ DesignVue PD Series User Manual page 29

You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
Your monitor is an edge-to-edge monitor and should
be handled with care. Avoid finder pressure on the
screen surface. Adjust the screen angle by placing
your hands on the top and on the bottom of the
monitor as illustrated. Excessive force on the display
is prohibited.
2. Connect the PC video cable.
The video cables included in your package and the socket illustrations in this document may vary
depending on the product supplied for your region.
1. Establish a video cable connection.
• Connect the plug of the HDMI cable to the HDMI port on the monitor.
• Connect the plug of the DP cable to the monitor video socket.
• (Models with Thunderbolt™) Connect the plug of the Thunderbolt™ cable to the monitor
video socket. Connect to the
• (PD3420Q) Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the
monitor.
PD2720U / PD2725U / PD3206U / PD3220U / PD3225U
2. Connect the other end of the video cable to an appropriate port of a digital output
source (e.g., a computer).
3. Tighten all finger screws to prevent the plugs from accidentally falling out during use.
(DP input only) After the monitor and the computer are powered on, if the image is not displayed,
disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System >
Advanced > DisplayPort on the OSD menu of the monitor and change the setting from 1.4 to 1.1 or
1.2. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the
OSD menu, see 5-way controller and basic menu operations on page
port if power supply to the video source is required.
or or or
29
PD3420Q
or or or
40.