1. Turn off the LCD display. Disconnect the display from the power outlet and remove all connected audio and video signal cables. 2. Place the display on a flat and stable surface and then put a piece of dry, soft and clean cloth with appropriate size in front of the display. Slowly tilt the display forward against the cloth until the display completely lies down.
Page 2
6. Connect the other end of the 9. Revert the display to its upright position and reconnect all audio, video speaker cables to the connectors on signal and power cables. the display. Note that the wire with...
Page 3
• 2 cables para bocinas • 2 cubiertas de goma Instalación de las bocinas 1. Apague la pantalla LCD. Desconecte la pantalla de la toma de corriente y quite todos los cables de audio y video. 2. Coloque el monitor en una superficie plana y estable y luego ponga un paño limpio, seco y suave del tamaño apropiado, frente a la pantalla.
Page 4
6. Conecte el otro extremo de los 9. Vuelva a colocar la pantalla en su posición original y conecte todos los cables de las bocinas a los cables de audio, video y de corriente.