Table of Contents
Advertisement
15.6.4
Securing the wheelchair in the docking station
Maneuver the wheelchair slowly and in a uniform direction over the docking station. The lock plate under
›
the wheelchair helps to guide the wheelchair into place in the docking station. When the lock plate is fully
engaged in the docking station, a spring-action locking pin automatically secures the lock plate.
The docking station is equipped with a control switch that indicates whether the lock plate is correctly se-
›
cured in the docking station. As soon as the lock plate comes into contact with the locking pin, a warning
tone will sound (a high-pitched howl), and the red diode/lamp (LED) in the control panel will light up until
the lock plate is either fully engaged or else the wheelchair is removed from the docking station.
As an indication that the wheelchair is properly secured, the warning tone will cease, the red lamp (LED) in
›
the control panel will go out and the green lamp (LED) will light up.
Do not forget to buckle up for driving.
›
)
)
Please refer to Dahl Engineerings installation and user guide for height
adjustable VarioDock™ system.
84
Loading and transporting your electric wheelchair
D A N G E R
Potential risk of injury or serious injury or death! Do not move
the vehicle:
›
Whilst the wheelchair is being maneuvered into position in
the docking station
›
If the wheelchair and user are not correctly secured.
›
If the warning tone sounds and/or the red warning lamp
(LED) in the control panel flashes or is lit!
Always check if the lock plate is properly engaged in the
docking station by trying to reverse the wheel chair out of the
docking station before moving the vehicle. (It must not be pos-
sible to reverse out of the docking station without pressing the
red release button in the control panel).
Loading and transporting your electric wheelchair
85
Advertisement
Table of Contents
