Table of Contents
Advertisement
44
Clear v ision
@
Tips
- The light sensor* for headlight control is
located in the rear view m irror mount.
You should therefore not apply any st ick-
ers to the windsh ield in this area in order
to prevent malfunctions or failures.
- Some exterior lighting functions can be
adjusted
c>
page 44.
- When you remove your key from the igni-
tion while the vehicle's lights are turned
on, a buzzer sounds as long as the driv-
er's door is open .
- In cool or damp weather, the ins ide of
the headlights, turn signals and tail
lights can fog over due to the tempera-
ture difference between the inside and
outside. They will clea r s hor t ly after
switching t hem on. This does not affect
the service life of t he lighting.
- In the even t of a light sensor malfunc-
tion, the driver is not ified in t he instru-
ment cluster disp lay¢
page 22.
Turn signals and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher .
Fig. 35 Turn sig nal and hig h beam lever
Turn signals
¢i ¢
The turn signals activate when you move the
lever into a turn s ignal pos ition when the ign i-
tion is switched on.
(D -
right turn signal
@ -
left tur n signa l
The turn s ignal blinks three times if you just
tap the lever .
High beams and headlight flasher [D
Move the lever to the correspon ding posit io n:
@ -
high beams on
@ -
high beams off or headlight flasher
The indicator light
II
in the instr ument clus-
te r turns on .
Not es on thes e features
- The
turn signals
on ly work w ith the ign ition
t ur ned on. The indicator lights
B
or
II
in
t he instrument cluster also blink.
- After you have turned a co rner, the tu rn sig-
na l switches off aut oma t ically.
- The
high beam
works on ly w hen the head-
lights a re o n. The ind icator light
II
in t he
instrument cluster illuminates when the
high beams are on .
- The
headligh t flasher
works only as long as
you ho ld the lever - even if the re a re no
lights switched on . The ind icator light
II
in
the instrument cluster illuminates when you
use the headlight flasher.
A
WARNING
-
-
Do not use the high beam or headlight
flashe r if you know that these could blind
oncom ing traffic.
Adjusting exterior lighting
The functions ore selected in the radio or
MMI" .
.,. Select:
I
CAR !
function button > Exterior
light ing.
Or
.,. Select:
!CAR I
function button> Car Systems
control button > Vehicle setting s> Exterior
lighting .
Coming home (light when leaving car}*,
Leaving home (light when unlocking car)*
The coming home function illuminates the
area around the vehicle when the ignition is
switched off and th e dr iver's door is open ed.
Depend ing on veh icle equ ipment, the function
can be switched on and off or the length of
time the lights remain on* can be adj usted .
..,.
Advertisement
Table of Contents
