Growatt MIN 3000TL-XH-US Installation And Operation Manual
Hide thumbs
Also See for MIN 3000TL-XH-US:
- Installation & operation manual (42 pages) ,
- Commissioning manual (53 pages)
Related Manuals for Growatt MIN 3000TL-XH-US
Summary of Contents for Growatt MIN 3000TL-XH-US
- Page 1 Growatt New Energy Installation Download Manual & Operation Manual Growatt USA,Inc 9227 Reseda Blvd,#435 Northridge,CA 91324,USA. +818 800-9177 usaservice@ginverter.com www.growatt-america.com GR-UM-210-A-00 GR-UM-210-A-00...
- Page 2 List 1 Information on this document Validity Target Group 1.3 Storage of the manuals 1.4 Symbols in this document 1.5 Glossary 2 Safety Intended Use Qualification of skilled person Safety instruction 2 4 Certified countries 2 5 DC and AC disconnect 2 6 Grounding the PV modules 2 7 Appropriated Usage 2 8 Operation Warnings...
- Page 3 6 Electrical connection 11 Growatt Warranty Safety Intended use Overview of the connection area Grounding 6 5 AC connection 6 6 PV connection 6 7 Battery connection 6 8 Energy Meter connection 6 9 Communication connection 12 Technical Data 12.1 Specification 12.2 Efficiency curve...
-
Page 4: Information On This Document
Respectez les instructions de service or practice, which, if not correctly performed or adhered to, could result in damage to or destruction of part or all of the Growatt equipment and/or other equipment connected to the Growatt equipment or personal injury. -
Page 5: Qualification Of Skilled Person
2.1 Intended Use Power rate The Growatt MIN TL-XH US series inverter converts the DC current generated by the Power rate is the radio of current power feeding into the power distribution grid and the photovoltaic (PV) modules to grid-compliant alternating current and performs single- maximum power of the inverter that can feed into the power distribution grid. -
Page 6: Certified Countries
"normal" leakage current may not exceed 50mA due to the fact that spins backwards. the inverter would otherwise automatically disconnect from the Energy is fed directly into the public grid. The Growatt is connected to a electricity grid as a protective measure. Public grid separate energy meter. -
Page 7: Inverter Overview
Persons with limited physical or mental abilities may only work with the Growatt inverter following proper instruction and under constant supervision. Children are forbidden to play with the Growatt inverter. Must keep the Growatt inverter away from children. Make all electrical connections (e.g. conductor termination, fuses, PE connection, etc.) in accordance with prevailing regulations. - Page 8 3.2.1 Product’s label 3.2.2 Warning label CAUTION！ Grid Support Hybrid Inverter Risk of Electric Shock, Do Not Remove Cover. Model name: No User Serviceable Parts Inside. Refer Servicing To MIN 7600TL-XH-US Qualified Service Personnel. Range of PV input voltage: Both ac and dc voltage sources are terminated inside this 50~600 Vdc equipment.
- Page 9 3.2.3 Labels in the wire box 3.5. Transportation The inverter is thoroughly tested and strictly inspected before delivery. Our inverters leave our factory in proper electrical and mechanical condition. Special packaging ensures safe and careful transportation. However, transport damage may still occur. The shipping company is responsible in such cases.
-
Page 10: Inspection Of Delivery
Instruction Inspection of delivery 5.1 Safety instruction 4.1 Unpacking and inspection Danger to life from electric shock due to high voltages The inverter is thoroughly tested and inspected strictly before delivery. Our inverters High voltages are present in the DC cables and later during leave our factory in proper electrical and mechanical condition. - Page 11 Ambient dimensions of series inverters 300mm 300mm 300mm 300mm 300mm Fig 5.1 300mm 300mm 300mm 300mm Ensure that the inverter is out of the children's reach. Don't put any physical item things on the inverter. Do not cover the inverter. ...
-
Page 12: Opening Conduit Drill Guides
1.RemoveRemove the cover. Please make sure the inverter is installed at the Proper location. The inverter can`t 2.Open the required AC ,AC, DC and COM conduit drill guides according to the conduits install close to trunk. used in the installation: The drill guides are located at the bottom and sides of the enclosure, each with two sizes:3/4'' and 1''. -
Page 13: Electrical Connection
Electrical connection 6.1 Safety Danger to life from electric shock due to high voltages High voltages are present in the DC cables and later during operation in the 8mm(0.31inch) conductive components of the inverter. These can cause fatal electric shocks. Before connecting, make sure the AC & DC disconnect is 104mm (4.09inch) turned off and measure the voltage within the limits of system. -
Page 14: Intended Use
The unit converts the DC (Direct Current) generated by the photovoltaic (PV) modules to discharge. grid-compliant AC (Alternating Current) and feed-in into the electricity grid. Growatt Take appropriate ESD precautions when replacing and installing the inverters are built according to all required safety rules. Nevertheless, improper use may DANGER inverter. -
Page 15: Overview Of The Connection Area
6.3 Overview of the connection area 240/120 split phase 240 delta 240V BAT+ Local 240 delta CAN/RS485 RS485 WiFi/4G(opt) WiFi BAT- 240V 208 delta/120WYE 208V Battery Back up AC Grid Communication Fig 6.3 Fig 6.2 6.3.1 AC connection area 6.2.3 PV string consideration There are a large number of PV module string combinations that will offer optimal performance from either the MIN TL-XH US series inverters. - Page 16 6.3.4 RGM connection area 6.3.2 DC connection area the positon of screw Fig 6.6 Fig 6.9 6.4 Grounding AC Grounding It must be connected to the AC grounding conductor of the power distribution grid via the ground terminal (PE). The AC input and AC output circuits are isolated from the enclosure and system grounding, if required by Section 250 of the National Electrical Code, ANSI/NFPA 70.
- Page 17 6.5 AC connection 6.5.1 Connecting the AC output power cable for AC Grid Strip 0.7 inches (18mm) of the AC cable insulation. Insert the AC conduit into the AC-side drill guide that was opened Insert the 0.8*4.0 mm standard flat-blade screwdriver and press the release mechanism and open the clamp ...
-
Page 18: Battery Connection
You can connect systems with multiple PV strings in parallel to the PV Power Grid input terminals, each MPPT tracker have two string input terminals AC Panel If more strings are required, they can be connected in parallel using an external combiner box before connecting to the input terminals. - Page 19 6.7.1 Power cable connection Battery short circuits may cause personal injury. The high transient current generated by a short circuit will release a surge of energy and may even cause fire. To prevent the risk of electric shock, do not connect or disconnect battery cables when the inverter is running.
-
Page 20: Energy Meter Connection
6.8.1 Cable connection Conductor cross-sectional Cable Meter Inverter Type area range AC wire-L1 ΦL1 AC wire-L2 solid or stranded ΦL2 wire but not fine 22-18 AWG AC wire-N stranded wire Ground PE symbol CT-ΦL1 L1 CT +/- CT-ΦL2 L2 CT +/- Fig 6.18 Standard cable wiring Min. - Page 21 6.9 Communication connection 6.9.1 RS485 BUS communication connection The MIN TL-XH-US series inverters offer an Modbus RS485 communication interface, the RS485 option enables creating a bus of connected inverters, consisting of up to 31 follower inverters and 1 leader inverter or 1 gateway or datalogger.Using this option, inverters are connected to each other in a bus by daisy chained, via their RS485 connectors.
- Page 22 Keep the wiring box clean. Fig 6.25 You can connect more than one inverter to the same switch/router or to different switches/routers as needed. Each inverter sends its data independently to the Growatt monitoring platform. LAN wiring specifications: Wire type: a shielded Ethernet cable (Cat5/5E STP) may be used...
-
Page 23: Checking Before Power-On
Commissioning 7.2 Powering on the system High voltages in the PV system Before turning on the AC switch between the power grid with MIN TL-XH US inverter, Risk of death or serious injury due to electric shock check that the AC voltage on the power grid side of the AC switch is within the specified Only electrically skilled persons may perform work on the PV array DANGER range. - Page 24 7.3.2 LED description 7.4 Powering off the system The single LED indicates the operational status of inverter. After the inverter powers off, the remaining electricity and heat may LED Designation Color Status Action Message still cause electric shock and burns. After power-off, wait 5 minutes before servicing the inverter.
- Page 25 Operations on the Shinephone APP 7.5.2 Blackout dark start button 8.1 Overview Button Application Trigger condition The Shinephone APP is a mobile phone app that can locally communicates with the MIN During grid outage, when the whole system TL-XH US over WiFi to allow for real-time status monitoring, system mode management, shutdowns for some reason, and can't Press the button for more performing routine maintenance, and commissioning.
- Page 26 Log in to our monitoring website server.growatt.com or server-cn Download at.growatt.com. After the app is installed, the ShinePhone icon is displayed on the home screen. Fig 8.4 Tab the ShinePhone icon to access the home screen of the app. 8.3 APP Login page 8.3.1 Home screen of the APP...
-
Page 27: Quick Setting
8.5 Quick setting 8.5.1 Grid Mode and time After you log in the Local tool successfully, the Home screen is displayed. You can tap in the quick setting icon, enter the quick setting screen. Taping in 'Read', the default settings or last time settings will be showed. Also, you can change the grid code that applies to the country or region where the PV plant is located and the particular inverter model. -
Page 28: Cleaning And Care
AC V Outrange Utility grid voltage is out and ground wire. You may be advised to contact Growatt in some situation, please provide the following Error: 300 of permissible range. 3.Check grid voltage is complied with information. - Page 29 Growatt Restart the inverter. If the warning still exist, PV1 or PV2 boost If the ambient temperature of inverter is Warning 205 please contact Growatt customer service to broken Error: 408 Over Temperature lower than 60°C, restart inverter, if error replace the power board.
-
Page 30: Dismantling The Inverter
I/O Voltage range 360V~550V Nominal DC Voltage 360V I/O DC Current I/O DC Power 5000W Growatt Warranty Battery Technology Please refer to the warranty card. Battery Capacity per 9.9kWh module Scalability Up to 4... - Page 31 Output data(AC) DC Surge protection Type II AC nominal power AC surge protection Type III 3000W 3800W 5000W 6000W 7600W @240V AC AC short-circuit Integrated Max. AC apparent protection 3000VA 3800VA 5000VA 6000VA 7600VA power Ground fault Integrated Nominal AC voltage 208V/240V monitoring AC voltage range...
-
Page 32: Ambient Temperature
12.3 Ambient temperature Warranty: 10 / 12 yes/optional years The inverter can be operated in an ambient temperature from -13℉ to 140℉(-25℃ to 60℃).The MIN TL-XH-US series inverter operate at full power and full currents up to a RSD(NEC2017 Integrated certain temperature, above which they may operate with reduced ratings to prevent 690.12) device damage. - Page 33 Contact If you have technical problems about our products, contact the GROWATT Serviceline. We need the following information in order to provide you with the necessary assistance: Inverter type Serial number of the inverter Event number or display message of the inverter ...
Need help?
Do you have a question about the MIN 3000TL-XH-US and is the answer not in the manual?
Questions and answers