Table of Contents
Advertisement
OPTIONAL STEP 13—INSTALL AUXILIARY POWER SUPPLY
Tools Used in this Step
#2 Phillips Screwdriver
Wire Cutters
Plastic Pry
IMPORTANT! These steps are only required if this unit
is paired with the Envision II 16" or ShowRunner II
consoles.
IMPORTANT! Be sure to switch power cable
connections before installing the optional auxiliary
power supply.
1. Using a plastic pry and a #2 Phillips screwdriver,
remove the right rear plastic covers using 2 plugs and
6 screws.
32
Parts Used in this Step
PART
XCS0072RBK
XCS0348BK
CX0501
CX0506
CX0079
CX0120
XCS0101
00595500
2. Using wire cutters, cut the zip tie that holds the power
3. Switch the power cable connection from the self-
CX0120
CX0079
XCS0348BK
CX0501
CX0506
XCS0072RBK
Power cable
connections for
consoles requiring
optional power
supply
connections for self
generating consoles
DESCRIPTION
REAR SHROUD COVER ASSEMBLY RIGHT
COVER, STRADDLE COVER END CAP RIGHT
PHMS, M5-0.8 X 12MM
SCREW, M4 X 15MM
PAN HD SCREW M5 X 0.8-12
COVER CAP
CABLE, POWER
POWER SUPPLY, FUYANG 12V 6A
cable.
generated connection to the power supply connection.
Power cable
QTY
1
1
1
3
2
2
1
1
Advertisement
Table of Contents
