True XC900 Owner's Manual page 27

STEP 9—ATTACH CONSOLE AND REAR CONSOLE COVER CONTINUED
2. Using a #2 Phillips screwdriver, secure the console to the console mast using the hardware preassembled to the
console (00567800 // SCREW, M5-.8X12 COMBO PHILLIPS/COMMON TRUSS HEAD - ACG BLACK // QTY 4).
NOTE: If the console also has three screws (00567700 // SCREW, M4-.7 X 12 PPHMS SEMS // QTY 3)
preassembled, remove and set aside these screws. They are not used in this installation.
3. Connect the console cables and ensure all cables are routed inside the console mast to avoid pinching the cables.
NOTE: Console cable connections are included in the console owner's manual.
XCS0323BK
00567800
remove and
set aside these
screws, they are
not used in this
installation
00567700
27