Signs And Symbols - Beurer ANTELOPE Evolution Instruction Manual

1. SIGNS AND SYMBOLS

The following symbols are used on the device, in these instructions for use, on the packaging and on
the type plate:
Warning
Warning instruction indicating a risk
of injury or damage to health
Product information
Note on important information
Manufacturer
Disposal in accordance with the Waste
Electrical and Electronic Equipment EC
Directive – WEEE
Separate the packaging elements and
dispose of them in accordance with
local regulations
Batch code
Hand wash
Maximum temperature of 40 °C
Do not bleach
Do not dry in a tumble dryer
IP class
IP22
Device protected against foreign
objects ≥ 12.5 mm and against water
dripping at an angle
Permissible storage temperature and
Storage/Transport
humidity
Biphasic rectangular pulses
Importer symbol
Important
Safety note indicating possible damage
to the device/accessory
Read the instructions
CE labelling
This product satisfies the requirements
of the applicable European and natio-
nal directives
Dispose of packaging in an
environmentally friendly manner
Separate product and packaging
components and dispose of them in
accordance with municipal regulations
Item number
Do not iron
Do not dry clean
Do not use the EMS product on people
with implanted electrical devices
(e.g. a pacemaker)
United Kingdom Conformity Assessed
Mark
Permissible operating temperature and
Operating
humidity
Isolation of applied parts
Type BF
Galvanically isolated applied part (F
stands for "floating"); meets the requi-
rements for leakage currents for type B
32