Page 2
CONTACT CUSTOMER CARE In case you have any further questions or queries regarding your ANTELOPE.TECHWEAR, please contact our Customer Care Team: info@antelope.de www.antelope.de +49 69 25786744 ANTELOPE - part of the Beurer group - BEURER GmbH...
Page 3
Indicates a hazard with a low level of CAUTION cessible location at all times, and ANTELOPE - part of the Beurer risk which, if not avoided, could result group - BEURER GmbH must be consulted if any issues or slight- in minor or moderate injury.
The ANTELOPE.TECHWEAR series stimulates the healthy muscles id1139453110?mt=8 to improve performance of human body or general well being. It is intended to be used by healthy adults only. • ANDROID: https://play.google.com/store/apps/details?id=- club.antelope.app&hl=en ANTELOPE - part of the Beurer group - BEURER GmbH...
• You have muscle spasms CAUTION Do not use the ANTELOPE.TECHWEAR on injured skin or to stim- ulate the muscles of an afflicted limb or joint. A possible side-effect of unfamiliar and intensive training is damage to the muscle tissue. This comes with the partial loss of strength, delayed muscle soreness and a significant increase of muscle protein levels (e.g.
(rhabdomyolysis). If you find yourself displaying one of these symptoms please contact a physician: • Brown urine • Myalgia (severe muscular pain) • Extreme swelling of the muscle ANTELOPE - part of the Beurer group - BEURER GmbH...
ANTELOPE.SUIT. fabric. A connection cable with magnetic buttons hangs from the ANTELOPE.SHORTS to enables the textile to be connected with the ANTELOPE.8C-BOOSTER. ANTELOPE - part of the Beurer group - BEURER GmbH...
Magnetic buttons attached to the ANTELOPE.CALF-GUARDS enables the textile to be con- nected with the ANTELOPE.2C-BOOSTER with external cables The ANTELOPE.CALF-GUARDS are only intended for training the calves. ANTELOPE - part of the Beurer group - BEURER GmbH...
7.9 BOOSTER Charging Cable The BOOSTER Charging Cable is a micro USB cable which con- nects to the ANTELOPE.8C-and ANTELOPE.2C-BOOSTER for the purpose of charging. ANTELOPE - part of the Beurer group - BEURER GmbH...
1. On the back of the BOOSTER there is a grid of buttons. Han- NOTE ging from your ANTELOPE.SHORTS there is a connector with We recommend using ANTELOPE.Techwear at least once to max. buttons. To connect the two, place the shorts connector on twice a week for 20 minutes. Between training sessions, suffi- the lower-most buttons of the BOOSTER.
2. Connect the jack plugs of the external cables to the jack plug input at the bottom of the 2C-BOOSTER. NOTE Be sure to observe which channel (I or II) the external cables are connected to. ANTELOPE - part of the Beurer group - BEURER GmbH...
BOOSTER and APPLY ANTELOPE. SPRAY directly to the elec- BOOSTER and Baseplate. (see 8.7.1) trodes in the textile. Then restart the ANTELOPE.APP and make ANTELOPE - part of the Beurer group - BEURER GmbH...
The nominal voltage in your electrical network fits the re- quirements of the charging device you are using. 8.8 Using the ANTELOPE.2C-BOOSTER and ANTELOPE. 8C-BOOSTER NOTE Please fully charge the ANTELOPE.8C-BOOSTER before initial use. ANTELOPE - part of the Beurer group - BEURER GmbH...
APPLY ANTELOPE. SPRAY directly to the electrodes in the textile. Then restart the ANTELOPE.APP and make sure that all intensity levels are set to 0. Once this process is completed, restart using Unpleasant your ANTELOPE.TECHWEAR according to the instructions in this manual. (see 8.1). feeling from Stimulation Stimulation intensity is •...
Page 17
Then restart the ANTELOPE.APP and make sure that all intensity levels are set to 0. Once Skin Condition varies others this process is completed, restart using your ANTELOPE.TECHWEAR according to the instructions in this manual. (see 8.1). Defect electrode Please contact our Customer Care-Team.
10. SAFETY INSTRUCTIONS Please follow the safety instructions. Doing otherwise may cause damage to the device and injury. • Store the ANTELOPE.TECHWEAR out of the reach of children in order to prevent them from swallowing parts of the prod- uct. •...
The textile is washable per hand (max. 30°C ). • Do not tumble-dry. Hang damp garment from line or bar, in or out doors. NOTE Textile colour may bleed during washing. ANTELOPE - part of the Beurer group - BEURER GmbH...
Damage that is not covered by the warranty can be repaired at a charge. The respective costs will be determined and com- municated. ANTELOPE - part of the Beurer group - BEURER GmbH...
Class II device with internal power supply This device must be separated from household waste and recycled as electronic waste Wash by hand Do not iron Do not tumble dry ANTELOPE - part of the Beurer group - BEURER GmbH...
Frequency band 2402 MHz – 2480 MHz The serial number of the BOOSTER can be found on the device. The serial number of the BOOSTER can be found on the device. ANTELOPE - part of the Beurer group - BEURER GmbH...
16. COMPANY INFORMATION ANTELOPE - part of the Beurer group - BEURER GmbH Niddastrasse 64, 60329 Frankfurt Main – Germany Company headquarters: Ulm – Soeflinger Strasse 218, 89077 Ulm – Germany Chairman: Dietrich Leisner Managing Directors: Marco Buehler, Georg Walkenbach, Oliver Neuschl...