Operation - OREC RM83G Instruction Manual

Check the tightening of bolts before use the machine, refering to the tightening torque charts.
The safety is one of our main worry when designing and manufacturing this machine.
Therefore, negligence in the use of the machine should reduce our efforts to nothing.
The prevention strictly depends on the care and on the skill of the user when applying
and maintening the machine.The best safety method remains a careful and skilled
The user of this machine is responsible for its safe use. He must be a skilled user specially trained for
the use of this machine. Read the safety instructions. This machine has been designed to mow grass.
It is not designed for any other operation. It is no designed to transport other tools or materials that
might damage it and cause injuries to the user. It must not be used to carry persons.
Never use the machine without having priorly carried out all the maintenance operations as
Never let children or unskilled persons use the machine. Check that nobody or no object
stands near the machine when at work. They could be hit by the moving parts.Nobody must
stand on the machine except the driver. Never put your hands under moving parts.
S
TARTING OF THE ENGINE
 Turn the fuel cock "ON" and seat down at operator's place.
 Check that the cutting blade is disengaged, height of cut lever in transport position and speed
lever in neutral position « N ».
 Push the throttle lever to the [
Press the brake pedal and turn the key clockwise in start position. When the engine has started,
release the key and pull back the throttle lever to [
MOWING
1. Adjust the height of cut control lever as needed.
Do not forget that it is better to mow grass in several times. Cutting result is clear and efficient.
Remember that the machine is deteriorated rapidly in hot and dry weather. When the cutting
height is low, the blade may hit the ground and it causes damage to the blade. The user and
bystanders are likely to be injured by the thrown object, The thrown object cause damage to
2. Push the throttle lever to have the engine running in the fastest speed. Then, slowly engage the
blade clutch lever in mowing position and go forward in the grass to mow.
3. Push slowly cutting blade control lever in engage position and go forward in the grass to mow.
OREC RM83G - © SAT 03/2015

OPERATION

user ; we wish you to be this kind of user.
described in the daily maintenance chapter.
] if engine is cold or push the throttle lever to [
their properties.
CAUTION
CAUTION
]
WARNING
13
] if engine is hot.