OREC RM83G Instruction Manual page 20

Brake
If the brake is not worked efficiently, tighten it with the nut
(B, Figure 28 / RM83G, C Figure 12b / RM830).
Tightening bolts
Check that the bolts, nuts...are properly tightened. The
vibrations tend to loosen the bolts.
Adjust safety switches
Ajust the screws for pushing the safety switches so they can
push switches from 3 to 5 mm.
Figure 28
Speed lever adjustment
Ajust the control link (A, Figure 29) in order to have the
B
machine staying still when the lever is at neutral.
D
IFF LOCK LEVER ADJUSTMENT
Ajust the control wire (B, Figure 29) until the lever has
a free play of 1 to 3 mm before activate the diff lock.
A
Figure 29
20
OREC RM83G - © SAT 03/2015