Change Alarm - VTech ip8300 User Manual

Telephone operation

Change alarm

Use this menu if you have set the alarm before and would like to change the
settings. To reset the alarm:
Step 1: Press the Menu softkey from the idle screen.
Step 2: Press the ,
then press the Select softkey or center NavKey/SEL/
Step 3: Press the up or down NavKey
the Options softkey.
Step 4: Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
alarm screen will display.
Step 5: Press the left or right NavKey
for the daily alarm.
Step 6: Press the down NavKey
time.
Step 7: Press the left or right NavKey
forth inside the box, and use the dial pad to enter the time.
Step 8: If the 12 hour format is chosen in Set time screen. Press the down
NavKey to move to the next box to choose AM or PM. Press the
left or right NavKey
Step 9: Press the Apply softkey or center NavKey/SEL/
alarm time will be shown on the Date and Time screen and an alarm
icon will be shown on the idle screen.
Step 10: The screen will display Enter valid value! if you enter incorrect
information.
Step 11: Press the Back softkey to return to the previous screen.
, and/or NavKeys to choose Date and Time
or to choose Alarm then press
or
or to choose between On or Off
to move to the next box to enter the
or to move the cursor back and
or to choose between AM or PM.
.
to choose Change alarm
. The Set
to confirm. The