Base Settings; Change System Pin - VTech ip8300 User Manual

Telephone operation

Base settings

Use this menu to change the system PIN, de-register handset and clear the
voicemail waiting indication (VMWI).
• The PIN digits
you enter will

Change system PIN

appear as * in the
The system will require you to input the PIN to register or de-register a
box.
handset. The default system PIN is 0000. The PIN must be four digits. To
change the PIN:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Press the Menu softkey from the idle screen.
Press the , , and/or
Settings then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
PIN then press the Select softkey or center NavKey/SEL/
Use the dial pad to enter the old PIN when prompted. Press the
Apply softkey when you are finished.
Use the dial pad to enter the new PIN when prompted. Press the left
or right NavKey or
to delete and press REDIAL/REMOVE to delete text if you make a
mistake.
Press the down NavKey
dial pad to re-enter the new PIN when prompted. Press the left or
right NavKey or to move the cursor to the place you want to
delete and press REDIAL/REMOVE to delete text if you make a
mistake.
Press the Apply softkey to confirm the new PIN and the screen will
display Accept. If the PINs entered in the two boxes are not the
same, PIN does not match! will be displayed.
NavKeys to choose Registration
or to choose Base Settings
or to choose Change System
to move the cursor to the place you want
to move to Confirm New PIN. Use the
.
.
.