Table of Contents
Advertisement
Telephone operation
De-register handset
This menu allows you to de-register the handset from the telephone base.
To de-register the handset:
Step 1:
Press the Menu softkey from the idle screen.
Step 2:
Press the
,
,
Settings, and press the Select softkey or center NavKey/SEL/
Step 3:
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Step 4:
Press the up or down NavKey
Handset then press the Select softkey or the center NavKey/SEL/
. The Enter PIN screen will be displayed.
Step 5:
Use the dial pad to enter the PIN when prompted. Press the left or
right NavKey
or
delete and press REDIAL/REMOVE to delete text if you make a
mistake.
Step 6:
Press the Apply softkey to confirm. The screen will display all the
handset(s) registered to the telephone base.
Step 7:
Press the up or down NavKey
de-register from the telephone base and press the Select softkey
or the center NavKey/SEL/
successfully de-registered.
and/or
NavKeys to choose Registration
or
to choose Base Settings
or
to choose De-register
to move the cursor to the place you want to
or
to choose the handset to
. The screen will display Handset
.
.
•
The default
system PIN is
0000.
•
When you enter
the PIN, the digits
will display as *
symbols on the
screen.
•
To register a
handset to the
base, see page
39.
Advertisement
Table of Contents
Need help?
Do you have a question about the ip8300 and is the answer not in the manual?