Area Code - VTech ip8300 User Manual

Telephone operation

Area code

This menu allows the system to filter out all the local call and add a 1 for the
other numbers. Enter local area code(s) in this menu and the system will
• The system will
treat all the telephone number stared with those area codes as local call. To
compare the first
three digits of
set area code:
the telephone
Step 1:
number with
Step 2:
the area code
already entered
in the area code
Step 3:
screen. If the first
three digits are
Step 4:
the same as the
codes in the area
code screen, the
system will dial
Step 5:
out the telephone
number as a local
call.
Step 6:
Press the Menu softkey from the idle screen.
Press the , , and/or
Settings, and press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
then press the Select softkey or center NavKey/SEL/
Press the up or down NavKey
press the Select softkey or the center NavKey/SEL/
Code screen will be displayed.
Use the dial pad to enter your area code in the box. Press the left
or right NavKey or
to delete and press REDIAL/REMOVE to delete text if you make a
mistake.
Press the Set softkey to confirm and The screen will display Set
Area Code successfully.
NavKeys to choose Registration
or to choose Base Settings
or to choose Area Code then
to move the cursor to the place you want
.
.
. The Area