Table of Contents
Advertisement
Section 4: Lubrication and Maintenance
April 2013
The following recommended lubricants are manufactured by Schaeffer Manufacturing
Company, but may be replaced with equivalent products manufactured by other reputable
companies. Lubricant selection must be made based upon ambient temperature and
application.
Table 2.
Product
#158 (ISO 68) Low Temp Oil
#267 EIM Std. Oil
#229 EIM Std. Grease
#200 SUG (Special for EIM)
#197 Low Temp, Grease
#271 Food Grade
#276 Food Grade Oil
#286 High Temp
#167 (Gear Oil) 75-140 Wt.
#238 EP 1 Grease
NOTE:
During operation of this actuator, gear housing temperature increase in combination with
variations of outdoor temperature may cause a small pressure build-up within the actuator gear
box. EIM furnishes Pressure Relief Vent Fitting Part No. 83385 to prevent excessive pressure
build-up. Pressure Relief Vent Fitting placement on the actuator can be determined after field
location and position of the valve have been determined. Select the highest 1/2NPT vent
location of the actuator gear box; remove the ½ NPT plug and replace with Part No. 83385.
6
Schaeffer Manufacturing Cpmpany Lubricants / Temperature for EIM
Products
Continuous Operating Range
-65 / +400°F (-54 / 204°C)
-20 / +350°F (-29 / 177°C)
-25 / +350°F (-32 / 177°C)
-40 / +400°F (-40 / 204°C)
-60 / +500°F (-51 / 260°C)
-15 / +500°F (-26 / 260°C)
-15 / +300°F (-26 / 149°C)
*Na / +900°F (*Na / 482°C)
-50 / +350°F (-45 / 177°C)
-10 / +350°F (-23 / 177°C)
Installation, Operation and Maintenance Manual
Part Number: E7K-400-0913
Part Number
3000100228
3000100227
3000100222
3000100212
3000100219
3000100216
3000100218
3000100220
3000100230
3000100226
Lubrication and Maintenance
Advertisement
Table of Contents
