Table of Contents
Advertisement
Section 3: Product Data
April 2013
Section 3: Product Data
The EIM 2000LP pneumatic actuator from Emerson is a multi-turn air driven actuator that
is perfect for applications using linear stem, rising stem or rotating stem valves. It can be
powered by air, nitrogen, or natural gas at pressures between 60 and 100 psi. Manual controls
and/or a number of remote pneumatic or electric control options can be provided as shown in
the table below.
Table 1.
Type
Manual
Pneumatic
Electric
There is a five digit alpha-numeric code used to describe basic actuator features for computer
assisted order entry. This number appears on the actuator nameplate affixed to the actuator
gear housing. The most significant designators for a sample 2CLG-AF actuator are shown
below.
2
Frame Size
1 = 1000
2 = 2000
3 = 3000
The 2000LP is based on the proven EIM Series 2000 platform and shares many of its distinctive
features and benefits such as direct mounting and handwheel operation during power loss or
emergency situations.
The three most common frame sizes of EIM actuators, the 1000, 2000 and 3000, establish the
foundation for the 2000LP. Subsequently, most major 2000LP mechanical components are
interchangeable with standard EIM electric actuators, which facilitates the acquisition of spare
parts.
The control housing is also a shared EIM electric component, resulting in NEMA 4, 4X and IEC
IP66 product ratings for the 2000LP. Working temperature range is listed at -20 / +150°F (-29 /
+66°C).
4
Standard Control Diagrams
Description
No Controls
Local 2-Way
Fail Close
Fail Open
Double Acting
Fail Close
Fail Open
Double Acting
C
L
Motor Size
Motor Gears
X = 6AM
Y = 8AM
Z = 16AM
Installation, Operation and Maintenance Manual
Diagram
PD-100
PD-101
PD-102
PD-103
PD-104
PD-105
PD-106
PD-107
G
-
A
Worm Gears
Control System
A = No controls
B = Local Manual
C = Remote
Part Number: E7K-400-0913
F
Special Services
Product Data
Advertisement
Table of Contents
