Tesla HS301WX User Manual page 7

CLEAN THE VACUUM CLEANER
Drop dust:
Push the dust cup bottom release button, then the dust will fall down automatically. Usually you may only do like this to drop
the dust. (fig. A)
Clean the dust cup:
Press the dust cup release button, then remove the dust cup from body.
Press the dust cup cover (for air exhaust) release button, take out the filter assembly out of the dust cup, then you can clean
them with soft brush or wash them with water. You should dry them completely before you use again. (fig.B).
Assemble the dust cup back after cleaning:
Connect the dust cup set to the body you hear a audible clicking noise. The dust cup will be locked.(pleases pay attention to
the fitting position and direction).
Clean the filter
Take out the filter set. (fig. A)
Clean the filter by soft brush or rinse it in water and dry them
completely before use again. All the filters are washable. (we
recommend you to clean the filters when feeling the suction power
becoming weak.) (fig.B)
Note: The above filters should be equipped in correct places when
work the vacuum machine
Clean the floor brush head
Remove the floor brush head from the vacuum cleaner by pressing
the release button.
Slide the locking button slightly.
Take out the brush roller by hand.
If necessary, carefully remove dirt/hair with a pair of scissors.
If need be, the brush roller can be washed. Let it dry completely
before inserting it again.
Fig. A
Filter Assembly
(Plastic Centering
Filter System)
Fig. B
Sponge and
HEPA Filter
Fig. A Fig. B
7