Installing optional M.2 SSD
1. Insert the SSD frame into the slot on the computer.
2. Tighten the M2*3 screw to secure the SSD frame to the computer.
3. Insert the SSD into the connector on the computer.
4. Place the SSD bracket over the SSD and tighten the M2*3 screw to secure it to the computer.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Hard drive
Removing hard drive assembly
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the hard drive assembly:
a. Disconnect the hard drive cable from the connector on the system board.
b. Remove the screws that secure the hard drive assembly to the computer.
c. Lift the hard drive assembly away from the computer.
22
Disassembly and reassembly
After working on your thin
Before working on your thin
client.
client.