Table of Contents
Advertisement
a. Disconnect the power connector port cable from the connector on the system board [1].
b. Remove the M2*3 screw to release the metal bracket that secures the power connector port [2].
c. Lift the metal bracket [3].
d. Lift the power connector port away from the computer [4].
Installing power connector port
1. Align the power connector port along the grooves on the slot and push it down.
2. Place the metal bracket on the power connector port.
3. Tighten the M2*3 screw to secure the power connector port to the computer
4. Connect the power connector port cable to the connector on the system board.
5. Install the:
a.
battery
b.
base cover
6. Follow the procedure in
Chassis frame
Removing chassis frame
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
c.
WLAN card
30
Disassembly and reassembly
After working on your thin
Before working inside your
client.
computer.
Advertisement
Table of Contents
