Installing Base Cover; Removing Battery - Dell P72S User Manual

Installing base cover

1. Place the base cover to align with the screw holders on the computer.
2. Tighten the M2.5 captive screws to secure the base cover to the computer.
3. Follow the procedure in
Battery

Removing battery

NOTE: 68 WHr battery supports only with the SSD card.
1. Follow the procedure in
2. Remove the base cover.
3. To remove the battery:
a. Disconnect the battery cable from the connector on the system board [1].
b. Unroute the battery cable from the routing channels.
c. Remove the M2*6 captive screw that secures the battery to the computer [2].
d. Lift the battery from the computer [3].
After working on your thin
Before working on your thin
client.
client.
Disassembly and reassembly 19