Installing keyboard
1. Hold the keyboard and route the keyboard cable through the placeholder.
2. Place the keyboard to align with the screw holders on the computer.
3. Tighten the M2*2 screws to secure the keyboard to the computer.
4. Connect the keyboard cable to the connector.
5. Install the:
a.
keyboard trim
b.
battery
c.
base cover
6. Follow the procedure in
Heat sink
Removing heatsink assembly
1. Follow the procedure in
2. Remove the:
a.
base cover
b.
battery
3. To remove the heat sink assembly:
a. Disconnect the system fan cable from the connector on the system board [1]
b. Remove the M2*3 screws that secure the heat sink assembly on the system board [2].
28
Disassembly and reassembly
After working on your thin
Before working on your thin
client.
client.