Xylem Lowara Sekamatik 100 Series Installation, Operation And Maintenance Manual page 13

1. General
1.1. Foreword
The staff employed on installation, operation,
inspection and maintenance must be able to prove
that they know about the relevant accident prevention
regulations and that they are suitably qualified for this
work. If the staff does not have the relevant
knowledge, they should be provided with suitable
instruction.
The operating safety of the pumps or units (i.e. pump plus
motor) supplied is only guaranteed if these are used in
accordance with the provisions given in the Confirmation of
Order and/or Point 6 in "Installation"
The operator is responsible for following the instructions and
complying with the safety requirements given in these
Operation Instructions.
Smooth operation of the pump or pump unit can only be
achieved if installation and maintenance are carried out
carefully in accordance with the rules generally applied in
the field of mechanical and electrical engineering.
If not all the information can be found in these Operating
Instructions, please contact us.
The manufacturer takes no responsibility for the pump or
pump unit if the Operating Instructions are not followed.
These Operating Instructions should be kept in a safe place
for future use.
If this pump or pump unit is handed on to any third party, it is
essential that these Operating Instructions and the operating
conditions and working limits given in the Confirmation of
Order are also passed on in full.
These Operating Instructions do not take into account all
design details and variants nor all the possible chance
occurrences and events which might happen during
installation, operation and maintenance.
Alterations or changes to the machine are only permitted by
agreement with the manufacturer. Original spare parts and
accessories authorized by the manufacturer should be used
for greater safety. We bear no responsibility for the
consequences of using other parts.
We retain all copyright in these Operating Instructions; they
are intended only for personal use by the owner of the pump
or the pump unit. The Operating Instructions contain
technical instructions and drawings which may not, as a
whole or in part, be reproduced, distributed or used in any
unauthorized way for competitive purposes or passed on to
others.
1.2. Guarantee
The guarantee is given in accordance with our Conditions of
Delivery and/or the confirmation of order. Repair work during
the guarantee period may only be carried out by us, or
subject to our written approval. Otherwise the guarantee
ceases to apply.
Longer-therm guarantees basically only cover correct
handling and use of the specified material. Wear and tear,
parts that are subject to wear such as impellers, mechanical
seals or packing, shaft seals, shafts, shaft sleeves, bearings,
split rings and wear rings etc., as well as damage caused
during transport or as a result of improper storage are not
covered by the guarantee. In order for the guarantee to
apply, it is essential that the pump or pump unit is used in
accordance with the operating conditions given on the type
plate, confirmation of order in the Data Sheet. This applies
particularly for the endurance of the materials as well as the
smooth running of the pump. If one or more aspects of the
actual operation conditions are different, we should be
asked to confirm in writing that the pump is suitable.
1.3. Safety regulations
These Operating Instructions contain important instructions
which must be followed when the pump is assembled and
commissioned and during operating and maintenance.
For this reason, these Operating Instructions must be read
by the skilled staff responsible and/or by the operator of the
plant before it is installed and commissioned, and they must
be left permanently ready at hand at the place where the
plant is in use. The operator must ensure that the contents
of the Operating Instructions are fully understood by the
staff. These Operating Instructions do not refer to the
General Regulations on Accident Prevention or local safety
and/or operating regulations. The operator is responsible for
complying with these (if necessary by calling in additional
installation staff).
The safety instructions contained in these Operating
Instructions have the following special safety markings as
specified in DIN 4844:
Safety reference!
Non-observance can impair the pump and its
function.
General Symbol for Danger!
Persons can be endangered.
Warning of electric voltage!
It is absolutely essential that safety information affixed
directly to the pump or pump unit is followed and maintained
so that it is always easily legible.
1.4. Safety instructions
Dangers of not following safety instructions
Failure to follow the safety instructions can result in the
following, for example:
 People being at risk because of electrical,
mechanical and chemical factors.
 Important functions of the pump or pump unit failing.
Safety instructions for the operator

Depending on the operating conditions, wear and
tear, corrosion or age will limit the working life of the
pump/pump unit, and its specified characteristics.
The operator must ensure that regular inspection and
maintenance are carried out so that all parts are
replaced in good time which would otherwise
endanger the safe operation of the system. If
abnormal operation or any damaged are observed,
the pump must cease operation immediately.
 If the breakdown or failure of any system or unit could
lead to people being hurt or property being damaged,
such system or unit must be provided with alarm
devices and/or spare modules, and they should be
tested regularly to ensure that they function properly.
 If dangerous media (e.g. explosive, toxic, hot) leak
out (e.g. from shaft seals), these must be directed
away so that there is no danger to people or the
environment. The provisions of the law must be
observed.
 Measures should be taken to exclude any danger
from electricity (e.g. by complying with the local
regulations on electrical equipment). If work is carried
13