Technical Information; Serial Terminal - Panasonic PT-TW231REA Operating Instructions Manual

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface
specification, so that the projector can be controlled by a personal computer which is connected to this connector.
Connection
J
Connecting terminals
Pin assignments and signal names
J
D-Sub 9-pin (male)
Outside view
Communication conditions
J
Signal level
Sync. method
Baud rate
Parity
Note
When [AMX D. D.] function is set to [On] under the [Network] menu, the Baud rate will change to 9600 bps
z
automatically.
on projector
D-Sub 9-pin (male)
D-Sub 9-pin (female)
Pin No.
RS-232C-compliant
Asynchronous
19200 bps
None
Computer
Communication cable
Signal name
— NC
RXD Received data
TXD Transmitted data
— NC
GND Earth
— NC
— NC
— NC
— NC
Character length
Stop bit
X parameter
S parameter
Contents
8 bits
1 bit
None
None
ENGLISH -
69