Flexibel mit Aderendhülse
mit/ohne Kunststoffhülse ......................................... 0,25...2,5 mm
Mehrleiter flexibel mit TWIN Aderendhülse
mit Kunstoffhülse ....................................................... 0,5...1,5 mm
Öffnungskraft ............................................................................. 50 N
Testöffnung, Durchmesser .................................................... 2,1 mm
Sonstiges
Betriebsart ..................................................................... Dauerbetrieb
Einbaulage ..........Kühlschlitze müssen senkrecht durchlüftet werden
Schutzart Einbauten (DIN EN 60529) ...........................................IP30
Schutzart Klemmen (DIN EN 60529) ............................................IP20
Option W
isoGEN423-D4W-4 zum Einsatz für besondere klimatische
Bedingungen.
EU-Konformitätserklärung
Der vollständige Text der EU-Konformitäts-
erklärung ist über den QR-Code verfügbar:
UKCA-Konformitätserklärung
Der vollständige Text der UKCA-Konformitäts-
erklärung ist über den QR-Code verfügbar:
Bender GmbH & Co. KG
Londorfer Straße 65
35305 Grünberg
Germany
Tel.: +49 6401 807-0
info@bender.de
www.bender.de
Flexible with ferrules
with/without plastic sleeve ...................................... 0.25...2.5 mm
2
Multi-conductor flexible with TWIN ferrules
with plastic sleeve ...................................................... 0.5...1.5 mm
2
Opening force ............................................................................. 50 N
Test opening, diameter ..........................................................2.1 mm
Other
Operating mode ................................................continuous operation
Mounting .......................... cooling slots must be ventilated vertically
Degree of protection, built-in components (DIN EN 60529) .........IP30
Degree of protection, terminals (DIN EN 60529) ..........................IP20
Option W
isoGEN423-D4W-4 for use in special climatic conditions.
Alle Rechte vorbehalten.
Nachdruck und Vervielfältigung nur mit
Genehmigung des Herausgebers.
All rights reserved.
Reprinting and duplicating only with
permission of the publisher.
EU Declaration of Conformity
The full text of the EU Declaration of Conformity
is available via the QR Code:
UKCA Declaration of Conformity
The full text of the UK declaration of Conformity
is available via the QR Code:
© Bender GmbH & Co. KG, Germany
Subject to change! The specified
standards take into account the edition
valid until 11/2023 unless otherwise
indicated.
2
2
Need help?
Do you have a question about the ISOMETER isoGEN423 and is the answer not in the manual?