Table of Contents
Advertisement
•
Fasten the hopper mount clamps together using four
5/16" x 3/4" carriage bolts and 5/16" hex lock nuts.
Tighten securely. See fi gure 19.
5/16" x 3/4"
CARRIAGE
BOLT
HOPPER
MOUNT
CLAMPS
FIGURE 19
•
To assemble the hopper bag to the sweeper, slide
the ends of the bag arm tubes into the ends of the
sweeper's hitch tubes and secure with two 1/4" x
1-3/4" clevis pins and 3/32" hair cotter pins. See fi gure
20.
BAG ARM TUBE
BAG ARM TUBE
FIGURE 20
5/16" HEX
LOCK NUT
3/32" HAIR COTTER PIN
3/32" HAIR COTTER PIN
1/4" x 1-3/4"
1/4" x 1-3/4"
CLEVIS PIN
CLEVIS PIN
Get other manuals https://www.bkmanuals.com
•
Secure the rope to the top center of the hopper bag
frame as shown in fi gure 21.
FIGURE 21
9
Advertisement
Table of Contents
