Table of Contents
Advertisement
•
Slide the two upper hopper tubes together and line up
the center holes as shown in fi gure 10.
FIGURE 10
•
Fasten the upper hopper tubes together by inserting a
plastic plug into the center holes. See fi gure 11.
PLASTIC PLUG
FIGURE 11
•
Turn the rear hopper tube so that the brace holes in
the middle of the tube face up. Assemble the ends
of the rear hopper tube onto the ends of the lower
hopper side tubes. Fasten together using plastic plugs.
See fi gure 12.
REAR HOPPER TUBE
(brace holes on top)
PLASTIC PLUG
LOWER
HOPPER
SIDE TUBE
FIGURE 12
UPPER HOPPER TUBES
Get other manuals https://www.bkmanuals.com
•
Place the assembled lower hopper tubes into the
bottom of the hopper bag as shown in fi gure 13.
•
Attach the ends of the lower hopper tubes to the
inside of the upper hopper tubes using two 3/8" x
1/2" clevis pins inserted from the inside, and two
3/32" hair cotter pins. See fi gure 13.
LOWER HOPPER TUBE
FIGURE 13
•
Insert the bag frame strap into the stitched sleeve
along the front edge of the bag bottom. See fi gure 14.
•
Assemble the bag frame strap to the holes in the
lower hopper tubes using two 1/4" x 1-1/8" clevis pins
and 3/32" hair cotter pins. See fi gure 14.
BAG FRAME STRAP
1/4" x 1-1/8"
CLEVIS PIN
FIGURE 14
7
UPPER
HOPPER
TUBE
3/32" HAIR
COTTER PIN
3/8" x 1/2"
CLEVIS PIN
HOPPER BAG
BOTTOM
3/32" HAIR
3/32" HAIR
COTTER PIN
COTTER PIN
Advertisement
Table of Contents
