Step 12 Connect Power; Step 13 Start Icemaker; Step 14 Install Toekick - Monogram ZIS360N Installation And Design Manual

Side by side
Table of Contents

Advertisement

STEP 12 CONNECT POWER

• Connect refrigerator power cord plug to a properly
grounded receptacle, accessible through the top of
the grille opening.
Raise
Grille
Panel
Sabbath / Light
Switch
• Check to make sure power to refrigerator is on by
opening refrigerator door to see if interior lights
are on.
• The temperature controls are preset at 37°F for the
fresh food section and 0°F for the freezer.
• Allow 24 hours to stabilize before making
adjustments.

STEP 13 START ICEMAKER

Green Power Light
• Flip the switch to I (ON). The icemaker will begin
operation automatically.
• Be sure nothing interferes with the sweep of the
feeler arm.
• Discard the first full bucket of ice cubes.
• To turn the icemaker off, set the switch to O (OFF).
Installation Instructions
Electrical
Outlet
Power Switch
Feeler Arm

STEP 14 INSTALL TOEKICK

• Locate the supplied toekick (shipped taped to
the side of the refrigerator). Install with 2 screws
provided, adjust to desired height and tighten screws.
• A custom toekick can be installed to match or
complement the surrounding cabinetry. Use the
supplied toekick as a template to cut the shape.
18
Supplied Toekick
1/4" or Thicker Toekick

Advertisement

Table of Contents
loading

Table of Contents