Table of Contents
Advertisement
3. Exposure Compensation
Set the exposure
compensation vaiue
Display Panel
Display in the viewfinder
Display Compensation
Value
If there is a great difference in brightness
between the main subject and
its background, the subject cannot be correctly
exposed. In this case, use the exposure
compensation. The exposure compensation can
aiso be used for intentionai over or under exposure.
To compensate exposure, turn the main power switch
on and turn the exposure compensation dial, then set
the desired compensation value on the display panel.
Compensating values can be set in 1/3 -EV steps within
the range of +2E\/ to -2EV. The '±' mark is displayed in
the viewfinder.
• Compensating value can be set also in 1/2 -EV
steps. (See Page 167)
• After shooting, return the dial to the original
position(without exposure compensation)
(compensation value disappears.)
122
Advertisement
Table of Contents
