Table of Contents
Advertisement
Shooting with Programmed AE
Under normal conditions, it is recommended to
use the programmed AE mode. In this mode,
both shutter speed and aperture are set
automatically to provide optimum exposure
under ambient lighting conditions.
Auto Focus Shooting Mode
Camera is focused automatically by pressing
the shutter release button halfway down.
Auto Flash Mode
Flash is fired automatically when shooting is done
under dark conditions or back light photography. If
" ^ " is lighted in the viewfinder, that means the
90
warning that flash will be fired.
• When the focus dial set to "AF"
"0", lens will
be retract into the camera and the front cover
closes . Then, camera main power switch is off.
• If you do not use the camera right away, turn off
the camera's main power switch in order not to trip
the shutter inadvertently.
• You can change the flash mode which it is set at
first when camera's power switch is on.(Page 150).
• You can set focusing position manually.(Manual
Focus Shooting: Page 160)
Advertisement
Table of Contents
