Home Position - Contax TVS III Instruction Manual

Flash Button /
Blitztaste / Touche de
mode de Hash /
Blinks/Blinkt/ Blinks / Blinkt /
Clignotement / Parpadso Clignotement / Parpadeo
<Home Position>
You can easily change the flash modefhome position).
It is convenient when you set the flash mode, which you
use often.
® When the camera main power switch is on,
continue to press the flash button (approx.2 sec.)
until the flash mark blinks.
(D
When it starts to blink, release your finger from the
flash button once and press the button again to
select the desired mode,
@ It changes from 'blinking' to 'lighted' after approx.8
seconds and is finished being set.
• This can be set by pressing the shutter release button
half-way down or switching off the camera main power.
150