Table of Contents
Advertisement
(
3
)
(D
Press select button and the number blinks
which you want to set.
(D
Press set button and set correct number.
® When finish setting 'Date' and 'Time', press
seiect button untii the biinking of number
turns off.
|0|
1
o O
*
f"*
P C.
n ri
(u L
I
nri
LIU
• As to setting the time, when 'Minute' blinks, press
select button simultaneously with the time signal to
set the correct time, starting from "00" seconds.
• Date and time display to be set is turned off after 8
seconds and switch to exposure counter with date
mark display only.
• The display with blinking change to date mark and
the display of exposure counter if it leaves as it is
for approx.eOsec. This can be set to the number of
the display of the blinking value. Correction of date
and time must be finished while blinking.
63
Advertisement
Table of Contents
