<Precautions for Opening and Closing the
Front Cover>
• Opening and closing the front cover must be done
through "0" <=> "AF" of main power switch.
If you force the cover to open by hand or try to
push it closed by hand, it may cause malfunction or
damage.
•
Do not put extreme force to the tip of front cover or
the tip of lens barrel It may cause malfunction or
damage.
<Precautions for front cover and during
operation of lens barrel>
• When the front cover or lens barrel is operating, do
not force it to stop.
• If you put pressure on the tip of the lens by
accident or turn the main power switch to "0" =>
"AF" while in a camera case, it may rattle for
approx. 1 to 6 seconds. This is not a malfunction,
but it works to protect the inner mechanism. At that
time, if the lens is stuck, try the following:
©
Turn the main power switch to
" once.
@
Turn the main power switch to "AF" again after
a while.
*
If the lens does not return with the first try,
repeat ® and @ several times. Then, the
protection mechanism will be released and
return to normal condition.
Need help?
Do you have a question about the TVS III and is the answer not in the manual?