Contax TVS III Instruction Manual page 18

Hide thumbs Also See for TVS III:
Table of Contents

Advertisement

® Focusing lndicator(also Distance Indicator)
<When setting to Auto Focusing>
Lighted or blinks according to the resuits of focusing.
~-5. 5J,
1 -0.5 blinks
and
1-0.5 either
1- 0,5 blinks
one of them is
lighted.
Focus within
the distance
range of
display
Too close to
Not possible
subject. Make
to focus
distance more
than 0.5m.
<When setting at Manual Focus>
Either one of °° - 5, 5- 2, 2-1, 1 - 0.5 is lighted
according to the setting value.
(D
Flash mark:
Lighted : Ready to fire the flash.
Delayed blinks(Twice per second): The flash is
charging.
Quick blinks{Four times per second): Warning out
of range of flash shooting. (If the subject is
too close, it will be 'Over Exposed. And if the
subject is too far, it will be 'Under Exposed'.)
@ Shutter Speed:
'1000' means 1/1000 seconds as to the display of
'Shutter Speed' and '15' means 1/15 seconds.
When two shutter speeds display at the same time,
it means that the shutter speed is in-between.
Also, if 'LT is lit, it means that the shutter speed is
between 1/10 sec, and 16 sec.
And if it blinks, it means that there is a deviation
from the exposure control range. It will be 'Under
Exposed'.
Also, if '1000' blinks, this means deviation from the
exposure control range. It will be 'Over Exposed'.

Advertisement

Table of Contents
loading

Table of Contents