Table of Contents
Advertisement
Optional Accessories.
<CONTAX Flash Adapter SA-1>
This adapter is used for
connecting a clip-on flash
to the camera without a
cord. It is useful when the
light output of the built-in
flash is not enough.
□ When using for CONTAX Tvs ill
Please use the direct metering auto-flash unit or manual
flash unit.
Set the aperture value to match the direct metering aperture
value of flash which is in use when using direct metering
auto-flash.
When you set 'P' to the camera, the aperture value would be
F3.7 at 30mm and F6.7 at 60mm when shooting distance of
-j
04
built-in flash when shooting distance of built-in flash is
exceeding the limit.
When using the manual flash, calculate the shooting
distance in order to get the proper exposure according to
following formula and try not to exceed the limit of distance
for shooting.
Guide Number
Shooting Distance (m) ---
(At ISO 100)
Aperture Value
{ Regarding the guide number, please refer to the
instruction manual of the flash which is in use).
Set the mode which built-in flash is fired with camera and
press the shutter release button for shooting after the
attached flash and built-in flash are fully charged.
•
Red-eye Reduction Flash Mode or Night Scene Portrait
Mode are not useable.
•
Attach this adapter to the position so that it does not hit the
camera back when it opens.
<CONTAX Tvs III Semi-Hard Case CC-77>
This ever-ready leather case can contain the CONTAX Tvs
III.
<CONTAX Tvs III Deluxe Strap>
Deluxe strap for the CONTAX Tvs ill.
Advertisement
Table of Contents
