Contax TVS III Instruction Manual page 5

Hide thumbs Also See for TVS III:
Table of Contents

Advertisement

10
Camera Care and Precautions:
Fingerprints and dirt on the iens and other parts
can adverseiy affect the accuracy of the camera. If
they are soiied, ciean them iightly with lens
cleaning tissue moistened with cleaning fluid. That
is enough in most cases.
To remove dust, blow off with a blower or dust off
with a lens brush.
• To clean the camera body, wipe off with a soft
cloth. Never use organic solvents such as benzene
and thinner.
• After shooting on a beach or in a dusty place, clean
the camera thoroughly. Salt air can cause
corrosion, and sand and dust can adversely affect
the camera mechanism.
®
if the camera is suddenly brought Into a warm room
from the outside where it is cold, the lens may be
clouded.
The cloudiness will disappear after a while, but
avoid sudden temperature changes if possible.
• This camera contains high-voltage circuits. In case
of malfunction, never try to disassemble it by
yourself because it is dangerous.
• If you are going to use the camera for important
events such as an overseas trip or wedding
ceremony, check to make sure it operates correctly
or make test exposures beforehand. It is also
recommended to bring a spare battery with you.
• The camera is a precision instrument. Do not drop
it and avoid intense shock.
<Using the Camera in Cold Weather>
If you are using the camera in cold weather, keep it
inside your clothing to warm it up.
As the temperature drops, the battery performance will
be temporarily reduced and the camera may not
operate. However, the battery performance returns to
normal at ordinary temperature.

Advertisement

Table of Contents
loading

Table of Contents